From prototype to certified device: the standards map for medical wearables
Certification is done with a regulatory partner, but most of the work it checks happens much earlier, in the design. This is a plain-language map of the standards a body-worn monitor usually meets.
This article is an engineering overview, not regulatory advice. The exact standards, classes and approval route depend on your device, its intended use and your markets. Always confirm them with a regulatory specialist.
Start with the intended use
The same hardware can be a wellness gadget or a medical device, depending on what you claim it does. “Shows your heart rate during exercise” and “detects atrial fibrillation” lead to very different requirements. Write the intended use first, because it decides the risk class and therefore everything after it.
The core standards
| Standard | What it covers | What it means for design |
|---|---|---|
| IEC 60601-1 | Basic safety and essential performance of medical electrical equipment | Leakage current limits, insulation, battery and charging safety, surface temperature on skin. |
| IEC 60601-1-2 | Electromagnetic compatibility | Board layout, shielding and firmware that recovers from interference. Plan pre-compliance tests early. |
| IEC 60601-1-11 | Equipment used in the home healthcare environment | Robustness, cleaning, ingress protection and use by non-professionals. |
| IEC 60601-2-47 | Ambulatory ECG systems | Performance requirements for recording ECG over long periods, where it applies. |
| ISO 80601-2-61 | Pulse oximeter equipment | SpO₂ accuracy and how it is tested, where SpO₂ is claimed. |
| IEC 62304 | Medical device software lifecycle | Requirements, architecture, tests and traceability for firmware and apps, scaled by software safety class. |
| ISO 14971 | Risk management | A living record of hazards, their causes and the design controls that reduce them. |
| IEC 62366-1 | Usability engineering | User studies showing patients and staff can place, wear and read the device without critical errors. |
| ISO 10993 | Biological evaluation of materials | Skin-contact materials such as adhesives and electrodes need biocompatibility evidence. |
| ISO 13485 | Quality management system | The framework the manufacturer works under. Design records must fit into it. |
Radio and market approvals
A Bluetooth device also needs radio approvals and Bluetooth qualification for each market: for example WPC approval in India, the Radio Equipment Directive under CE marking in Europe and FCC rules in the US. Using a pre-certified radio module can shorten this step.
The medical approval itself comes from the regulator in each market, such as CDSCO in India under the Medical Device Rules, a notified body under the EU MDR, or the FDA in the US.
What to do from the first prototype
- Keep a design history. Requirements, decisions, schematics, test results and versions, with dates. It is much cheaper to keep than to rebuild later.
- Start the risk file early. Each hazard you think of during design, such as a hot battery, a missed alarm or a misleading reading, goes into it with the control you chose.
- Separate the software. Keep safety-relevant firmware small and well tested, apart from features like themes and settings.
- Choose materials with evidence. Adhesives and electrodes that already have biocompatibility data save months.
- Test for EMC before the enclosure is final. Layout fixes are cheap on version two and expensive on version five.
Where we fit
Kokoveda is not a certification body, and our reference patch Hridya is a research device that is not certified. We design and document devices toward these standards, and hand over records ready for your regulatory partner. See how we work.
Want an ECG and SpO₂ patch under your own brand?
Our prototype, Hridya, already records ECG, SpO₂ and motion and streams them to its own app. Develop it with us into your product, or let the same team build your own device.